Servers

A Minecraft server on a VPS: how much RAM for 10, 30 and 100 players, and which plan to pick

accsly editorial 18 min read
Node Proxy
In this piece
  1. How many players are you planning for?
  2. Why the server lags even though memory is free
  3. How much memory to give Java and how much to leave the system
  4. Moscow or Western Europe?
  5. Where a plan lets Minecraft down
  6. How to run Paper on your own server
The short answer
  1. Ten friends are fine on 2 cores and 4 GB of RAM, a public 30-slot server with plugins needs 8 GB, and a 100-player community needs 4 cores and 16 GB. The CPU matters more than memory: look for a clock speed of 3.5 GHz or higher.
  2. If your players are in Russia, keep the server in Moscow or St Petersburg and run Paper on it instead of Mojang's standard server. Paper is faster, and almost every plugin is written for it.
  3. A suitable plan costs from $8.22 a month for 10 players, from $12.76 for 30 and from $23.85 for 100. That is roughly $99 to $286 a year.

In Russia you can also find 4 GB servers for $4–7 a month, but those plans almost never say what clock speed the CPU runs at. Out of 209 Russian plans with 4 GB and two cores, only 26 promise 3.5 GHz or more. For Minecraft that is the key number: with a slow core the game lags even when memory is free. That is why the list above only shows plans with a known clock speed.

Why does clock speed matter so much? Minecraft lives by ticks. There are 20 of them per second, each one gets 50 ms, and nearly all of that work runs in a single thread. The Minecraft Wiki notes that the core world mechanics are not split across cores, and game hosting companies say outright to look at clock speed rather than core count. When a tick runs past 50 ms, players see mobs freeze and blocks pop back into place.

01 · Size

How many players are you planning for?

Memory is eaten not by the players themselves but by the pieces of world around them. Every player keeps hundreds of chunks loaded, and if ten people wander off in different directions, the machine has to hold ten separate parts of the map. Plugins add their share, and modpacks roughly double the bar. The figures below include headroom for Paper with a dozen plugins. I compared the advice of several game hosting companies: KernelHost, Empower Servers and XGamingServer differ by a gigabyte at most.

Which server your Minecraft needs
How to choose a Minecraft server With more than fifty players you need 4 cores at 3.5 GHz or more, 16 GB of RAM, 100 GB or more of NVMe and DDoS protection, from $23.85 a month. With fifteen or more players, or with plugins and mods, 8 GB and 50 GB of NVMe are enough for $12.76. A group of up to 10–15 friends needs 2 cores and 4 GB for $8.22. In every case you need 3.5 GHz or more, NVMe instead of a hard drive, and Java should get 1–1.5 GB less than the plan has. Your server More than 50 players online at once? yes no 4 cores · 16 GB 3.5 GHz · NVMe 100 · DDoS from $23.85/mo ≈ $286 a year 15+ players or plugins and mods? yes no 2–4 cores · 8 GB 3.5 GHz+ · NVMe 50 GB+ from $12.76/mo ≈ $153 a year 2 cores · 4 GB 3.5 GHz+ · NVMe 30 GB+ · up to 10–15 friends from $8.22/mo · ≈ $99 a year ALWAYS 3.5 GHz or faster NVMe, not HDD Java 1–1.5 GB below plan How to choose a Minecraft server More than fifty players: 4 cores at 3.5 GHz or more, 16 GB and DDoS protection, from $23.85 a month. Fifteen or more players, or plugins and mods: 8 GB for $12.76. Up to 10–15 friends: 2 cores and 4 GB for $8.22. Always 3.5 GHz or more and NVMe. Your server More than 50 players online at once? yes no 4 cores · 16 GB 3.5 GHz · DDoS protection from $23.85/mo ≈ $286 a year 15+ players or plugins and mods? yes no 2–4 cores · 8 GB 3.5 GHz+ · NVMe 50 from $12.76/mo ≈ $153 a year 2 cores · 4 GB up to 10–15 friends from $8.22/mo ≈ $99 a year ALWAYS 3.5 GHz or faster NVMe, not HDD Java below plan RAM
"From" on the chart means the cheapest plan without a catch. Such a plan has its own IP address and NVMe, the CPU clock speed is listed on the host's site, you can pay monthly, and there is no setup fee. Prices come from the accsly.io catalogue on 7 November 2026 for servers in Russia.

A world for 10 friends

This is survival for a group of friends, a class or a family. Only people you know join, there are few plugins or none, and the world grows slowly.

  • 2 cores at 3.5 GHz+
  • 4 GB RAM
  • NVMe 30 GB+
  • IPv4
from $8.22 /mo≈ $99 a yearHalf of the suitable plans cost less than $20.68 a month, about $248 a year.

The Minecraft Wiki says a server for 5–10 people on default settings needs 2 GB of RAM, and recommends 4 GB for ten or more. Hosts quote the same 3–4 GB for Paper. You give Java 3 GB of that and leave the rest to the system. The second core is not for the game itself but for everything around it: world saves, Java garbage collection and SSH.

If some friends play on a phone or a console, they don't need a separate machine. The Geyser plugin lets Bedrock players join a Java server, and all it takes is one more open port.

A public 30-slot server

This covers a server with plugins for land claims, an economy and minigames that strangers join, and also a modpack for a small group.

  • 2–4 cores at 3.5 GHz+
  • 8 GB RAM
  • NVMe 50 GB+
  • IPv4
from $12.76 /mo≈ $153 a yearThe median for these plans is $39.13 a month, about $470 a year.

For 30 players on Paper, hosts recommend 4–6 GB, and with many plugins 6–8 GB. An 8 GB plan gives Java exactly 6 GB and leaves the system some headroom. A modpack for 10 people needs the same: KernelHost puts it at 8 GB, Empower Servers at 6–8 GB.

Going from 4 to 8 GB on the cheapest honest plans costs about $4.50 a month, roughly $55 a year. If it is meant to be public, I would take 8 GB from the start. Moving a lived-in world to another plan costs you an evening, and with some hosts a new IP address too.

A 100-player community

This is a long-running project with its own website, cosmetic perks, a lobby and several game modes.

  • 4 cores at 3.5 GHz+
  • 16 GB RAM
  • NVMe 100 GB+
  • DDoS protection
from $23.85 /mo≈ $286 a yearThe median for suitable plans is $69.99 a month, about $840 a year.

For 100 players, KernelHost and Empower Servers agree on 10–12 GB without plugins, and with plugins KernelHost recommends up to 16 GB. You don't need more. Giving Java too much memory only lengthens garbage collection pauses, and the game starts freezing for a second every few minutes. Once 16 GB is no longer enough, the project is split across several servers behind the Velocity proxy: the lobby on one, survival on another. For comparison, Rust, Palworld and ARK need 12–16 GB — why, and how not to overpay, is in Rust, Palworld or ARK server on a VPS.

Sooner or later someone will try to knock a public 100-player server offline with a flood of junk traffic. The Java edition accepts players over TCP on port 25565, and that port is what needs protecting, not just the website. Plans with this kind of protection are on the DDoS-protected VPS page.

What it costs per month and per year
cheapest quarter of plansnext quarter, up to the middle of the market
10 players2 cores · 4 GB · 15 plans
8.2213.32$20.68
$99–248a year
30 players2+ cores · 8 GB · 14 plans
12.7625.98$39.13
$153–470a year
100 players4 cores · 16 GB · DDoS · 13 plans
23.8541.76$69.99
$286–840a year
Data table
ServerPlansMinimumOne in four cheaper thanMedianYear, min–median
10 players, 2 cores, 4 GB, NVMe 30 GB+158.2213.3220.6899–248
30 players, 2+ cores, 8 GB, NVMe 50 GB+1412.7625.9839.13153–470
100 players, 4+ cores, 16 GB, NVMe 100 GB+, DDoS1323.8541.7669.99286–840
With each step up in player count, the cheapest honest plan gets one and a half to two times more expensive. Prices are in US dollars per month on monthly billing, converted from roubles at the Central Bank of Russia rate; a year is twelve months. The sample covers plans in Russia with their own IP address, a CPU clock of 3.5 GHz or more stated on the host's site and NVMe, without prepayment for several months and without a setup fee. accsly.io catalogue, 7 November 2026.

I would pick from the dark part of each bar: up to $13.32 for friends, up to $25.98 for a public server and up to $41.76 for a community. Above that you mostly pay for disks of several hundred gigabytes or a well-known brand, and Minecraft won't run any faster for it. How prices change with the amount of memory is shown in VPS prices in 2026.

02 · Lag

Why the server lags even though memory is free

Most often the culprit is view distance. The view-distance setting in server.properties sets the radius in chunks around each player, 10 by default. A chunk is 16 by 16 blocks, and a square 21 chunks wide gives 441 chunks per person. Lower the radius to 8 and you get 289 chunks, a third fewer. Players will barely notice; the server will notice at once.

How much world the server holds around one player
Chunks around a player at different view distances At view-distance 10 the server keeps a 21 by 21 chunk square around the player, 441 chunks. At 8 it is 17 by 17, or 289 chunks, a third fewer. At 6 it is 13 by 13, or 169 chunks, 2.6 times fewer than the default. view-distance 10, the default 441 chunks a 21 × 21 square view-distance 8 289 chunks a third fewer view-distance 6 169 chunks 2.6 times fewer ■ player · one cell = a 16 × 16 block chunk Chunks around a player at different view distances At view-distance 10 there are 441 chunks around the player, at 8 there are 289, at 6 there are 169. 10, the default: 441 chunks 8: 289 chunks, a third fewer 6: 169 chunks, 2.6 times fewer ■ player · cell = a 16 × 16 block chunk
The chunk count grows with the square of the radius, so even going from 10 to 8 removes a third of the load. The default value and what the setting means come from the Minecraft Wiki; KernelHost gives the same 441, 289 and 169 chunks.

The second cause of lag is players exploring new land. Creating a new chunk is much heavier than loading a finished one, and it happens on the same main thread. So it is better to generate the world in advance while nobody is playing: the Chunky plugin does it overnight. I show how to run it in step 6 below.

The third cause is your neighbours on the physical machine. Cheap plans share a core between customers, and when a neighbour loads the CPU, your tick runs late. Run top in the evening when everyone is playing and look at the st value in the %Cpu line. If it stays above a few percent, ask the host to move you or pick a plan from the 4 GHz and up selection, where cores are usually oversold far less.

03 · Memory

How much memory to give Java and how much to leave the system

The most common beginner mistake looks like this: an 8 GB plan, and -Xmx8G in the start command. The Paper documentation, in its section on startup flags, asks you plainly not to do this and to leave 1–1.5 GB for the system, and KernelHost recommends giving Java 75–85% of the plan's memory. Java needs memory beyond the heap too: for threads, networking and its own housekeeping. If there isn't enough, Linux simply kills the process with no warning in the game.

How to split the plan's memory
4 GB plan10 players
-Xmx3G1 GB
8 GB plan30 players
-Xmx6G2 GB
16 GB plan100 players
-Xmx13G3 GB
Java heap, set in -Xms and -XmxLinux, SSH and Java memory beyond the heap
The bigger the plan, the larger the share you can give Java, but never all of it. Shares follow the advice in the Paper documentation (leave 1–1.5 GB) and from KernelHost (75–85% of the plan).

Set -Xms and -Xmx to the same number. That way Java takes its memory right away and doesn't waste time growing and shrinking the heap mid-game. This is also advice from the Paper documentation, and I show the full command with the other flags in step 7.

04 · Location

Moscow or Western Europe?

If your players are in Russia, choose a server in Moscow. Minecraft forgives ping more easily than a shooter does, but in PvP and fast building the delay shows. Moscow to Frankfurt averages about 49 ms, and from most Russian cities Moscow is closer still. I wrote more about ping to different cities in the article on a CS2 server, which also has measurements to St Petersburg and Novosibirsk.

Western Europe makes sense if some of your players live there. It is also a little cheaper: a 4 GB plan at 3.5 GHz or more in the Netherlands, Germany and Finland starts at $7.80, and the median there is $13.32 against $20.68 in Russia.

05 · Catches

Where a plan lets Minecraft down

Once a plan fits on memory, check it against five more points. Each has a sign you can see on the host's page or in the first minutes on the server.

  1. The CPU clock speed is not listed

    Of 209 Russian plans with 4 GB and two cores, 125 list no clock speed at all, and 34 are below 3 GHz. Behind such listings there are often decade-old Xeons that struggle to fit a tick into 50 ms.

    How to tell: the page mentions neither "GHz" nor a model such as Ryzen 9, EPYC 9004 or Xeon Gold. Ask support before paying.
  2. The core is shared with neighbours

    Two cores look enough on paper, but in the evening the game suddenly runs 15 ticks per second instead of 20. Usually it means the physical CPU is overloaded with other people's machines.

    How to tell: top shows st above 5% at the hours when everyone plays.
  3. A hard drive instead of an SSD

    Among Russian 4 GB plans with two cores there are 12 with a hard drive, and they look like a bargain because of the size. Minecraft saves the world all the time, and on a slow disk every save freezes the game.

    How to tell: the plan name says "HDD" or "SAS", and the words SSD and NVMe are missing.
  4. All the memory is given to Java

    A server with -Xmx8G on an 8 GB plan runs for a week and then silently disappears mid-evening. That is how the system saves itself when memory runs out.

    How to tell: in journalctl -u minecraft the process ended with a KILL signal, and dmesg says "Out of memory".
  5. DDoS protection for websites only

    The word "protection" in a plan means nothing on its own. Many filters only understand web traffic and let a flood of junk through to the game port.

    How to tell: the description says "L7 protection" or "website protection". Ask support directly: "do you filter attacks on TCP port 25565?"

See how this looks on live plans. Below are the cheapest plans in Russia with two cores and 4 GB of RAM, with no filter on clock speed or disk. Notice how many rows have no clock speed or one below 3.5 GHz, and where the disk turns out to be a hard drive. An orange label, if present, means the plan has no IP address of its own.

06 · Setup

Planning a GTA 5 roleplay server on FiveM? How much memory and CPU it takes and what the launch costs is covered in A GTA 5 RP server after RAGE MP shut down: which VPS FiveM needs.

How to run Paper on your own server

The setup is shown on Ubuntu 24.04 with Minecraft 26.3, the latest version as of November 2026. Since 26.1 it requires Java 25, and the Paper documentation says the same. If you want more control over game mechanics, you can install Purpur instead of Paper; it is built on Paper and starts the same way. Run the commands as root unless a step says otherwise.

  1. Order the server

    Choose Ubuntu 24.04, Moscow or St Petersburg, and a plan from the cards above.

  2. Install Java and create a user

    The server will run without admin rights, so a hole in a plugin only gives an attacker the game folder. The Java 25 package is in the standard Ubuntu 24.04 repositories.

    apt update && apt -y upgrade
    apt install -y openjdk-25-jre-headless jq
    adduser --disabled-password --gecos "" mc
  3. Download Paper

    The link to the latest stable build comes from the PaperMC downloads API. It asks you to identify yourself in the User-Agent header, so put your email there.

    su - mc
    mkdir -p ~/server && cd ~/server
    UA="my-mc-server/1.0 (you@example.com)"
    URL=$(curl -s -H "User-Agent: $UA" https://fill.papermc.io/v3/projects/paper/versions/26.3/builds \
      | jq -r 'first(.[] | select(.channel == "STABLE") | .downloads."server:default".url)')
    curl -o paper.jar "$URL"
  4. Accept the EULA and tune the world

    The first run stops by itself and creates eula.txt. The server won't start until you agree to Mojang's licence agreement. Then lower the view distance as discussed above.

    java -Xms2G -Xmx2G -jar paper.jar --nogui
    sed -i 's/eula=false/eula=true/' eula.txt
    sed -i 's/^view-distance=.*/view-distance=8/; s/^simulation-distance=.*/simulation-distance=6/' server.properties
    exit
  5. Open the port

    The Java edition needs TCP 25565. If you add Geyser for Bedrock players, also open UDP 19132, the standard Bedrock port.

    ufw allow 22/tcp
    ufw allow 25565/tcp
    ufw allow 19132/udp        # only if Geyser is installed
    ufw enable
  6. Pre-generate the world

    Put Chunky into the plugins folder, start the server by hand and type the commands below into its console. A radius of 3,000 blocks will last a small community a long time. Wait for generation to finish, make yourself an operator and stop the server.

    su - mc -c "cd ~/server && java -Xms6G -Xmx6G -jar paper.jar --nogui"
    # in the server console:
    chunky radius 3000
    chunky start
    op YOUR_NAME
    stop
  7. Make the server a service

    A systemd service restarts the server after a crash and brings it back after a reboot. The flags below come from the Paper documentation; memory is set for an 8 GB plan. Create /etc/systemd/system/minecraft.service.

    [Unit]
    After=network-online.target
    Wants=network-online.target
    
    [Service]
    User=mc
    WorkingDirectory=/home/mc/server
    ExecStart=/usr/bin/java -Xms6G -Xmx6G -XX:+UseG1GC -XX:+ParallelRefProcEnabled -XX:MaxGCPauseMillis=200 -XX:+UnlockExperimentalVMOptions -XX:+DisableExplicitGC -XX:+AlwaysPreTouch -XX:G1NewSizePercent=30 -XX:G1MaxNewSizePercent=40 -XX:G1HeapRegionSize=8M -XX:G1ReservePercent=20 -XX:G1HeapWastePercent=5 -XX:G1MixedGCCountTarget=4 -XX:InitiatingHeapOccupancyPercent=15 -XX:G1MixedGCLiveThresholdPercent=90 -XX:G1RSetUpdatingPauseTimePercent=5 -XX:SurvivorRatio=32 -XX:+PerfDisableSharedMem -XX:MaxTenuringThreshold=1 -jar paper.jar --nogui
    Restart=always
    RestartSec=10
    
    [Install]
    WantedBy=multi-user.target
  8. Start it and check the ticks

    Connect from the game using SERVER_IP; you can leave out the port. In the evening, when players gather, type /mspt in chat: as long as the number stays below 50, the server keeps up.

    systemctl daemon-reload
    systemctl enable --now minecraft
    journalctl -u minecraft -f

Backups. The world lives in the world, world_nether and world_the_end folders. Copy them once a day to another machine or to storage, because a broken chunk or a bad plugin can ruin months of building.

Updates. A new Paper build for the same version is safe to install: stop the service, repeat step 3 and start it again. With a move to a new Minecraft version, wait until your plugins are updated, and always back up the world first.

Prices come from hosting companies' websites, converted at the Central Bank of Russia rate. The live plan blocks refresh every hour, so their figures may differ slightly from the text. Minimums and medians were calculated from the accsly.io catalogue on 7 November 2026. All high-clock plans for this game are collected on the VPS for Minecraft page.

Share this piece Telegram

Read next