How to read a dedicated server configuration
A dedicated server plan fits everything into one line: "Xeon E5-2680 v4, 128 GB, 4 TB SSD RAID-10, 1 Gbps". But lines that look the same mean different things at different hosts. Below: what stands behind each part of the configuration, where hosts write something other than what you expect, and what to clarify before you pay.
The short answer. Look at the CPU model and its release year, not the number of cores. Divide the disk capacity by two if the disks are in a RAID 1 mirror. The port is the speed of the link, not the amount of traffic: ask how many terabytes a month are included and whether the speed is guaranteed. And add the setup fee, tax and extra IP addresses to the price.
A plan line, piece by piece
Take two real lines from the accsly catalog on 14 November 2026. HostingSource: "Xeon E5 2680v4 — 14 cores, 128 GB, SSD Storage (H/W RAID-10): 4 TB", $139 a month. OVHcloud: "Rise RISE-1: Intel Xeon-E 2386G, 6 cores / 12 threads, 3.5–4.7 GHz; 32 GB DDR4 ECC; 2×512 GB NVMe, Soft RAID; 1 Gbit/s, unlimited traffic", €56.99 a month excluding VAT, and the same amount again as a setup fee with monthly billing.
| Part of the line | What it means | What to check |
|---|---|---|
| CPU model | Generation, clock speed, number of cores | Release year and turbo frequency, on the manufacturer's website |
| Cores / threads | Physical cores and their threads | What exactly the host calls "cores" |
| Memory | Size, DDR4 or DDR5, ECC | Whether it is ECC and whether memory can be added |
| Disks | Number, size and type of disks | Capacity after RAID and the RAID type |
| Port | Link speed | Whether the speed is guaranteed and how much traffic is included |
| Price | Per month for the chosen term | Setup fee, VAT, extra IPv4, discount for a longer term |
CPU: the model matters more than the core count
The accsly catalog lists 7,710 dedicated server plans at 197 hosts. The CPU model is named for 7,336 of them, and it is the key line of the configuration. The model tells you the generation. For example, the Intel Xeon E5-2680 v4, according to Intel's data, came out in early 2016: 14 cores, 28 threads, a 2.4 GHz base clock and 3.3 GHz in turbo mode. Xeon E5 series processors are used in 1,974 plans in the catalog, roughly one in four. They are cheap and have many cores, but a single core is noticeably slower than on processors from recent years.
Three places where a line is easy to misread:
- Cores and threads. Some hosts list physical cores, others list threads, of which there are twice as many. "28 cores" on an E5-2680 v4 means the threads of one processor, not 28 cores.
- Different kinds of cores. Newer Intel Core processors have two types of cores. The Intel Core i5-13500, according to Intel's data, has 14 cores: 6 performance cores and 8 efficient cores, 20 threads in total. Hetzner EX44, for example, runs on this processor for €59 a month.
- Two processors. "2 x Xeon Gold 5415+" means two physical chips with 8 cores each, and the catalog records 16 cores for this Digital Pacific plan, the sum of both.
Clock speed matters if a program loads a single core: game servers, 1C, single-threaded calculations. In that case look at the turbo frequency and the generation, not the core count. If the workload splits well across threads, such as builds, virtualization or many websites, the core count of an older Xeon may be the better deal. How to estimate cores and memory for a task is covered in the article how much memory and how many cores a website needs; selections by processor are servers on AMD EPYC and high-frequency servers.
Memory
Besides the size, the line may give the type (DDR4 or DDR5) and an ECC mark. ECC memory corrects single-bit errors by itself and reports them to the system. On a server that runs for years without a reboot, this noticeably reduces the risk of silent data corruption. How a dedicated server differs from a VPS in terms of hardware guarantees is covered in the article dedicated server or VPS. If memory may run short in a year, ask how many slots are free and how much it costs to add a module.
Disks: the total or the capacity after RAID
"2×512 GB NVMe" means two disks of 512 GB each. They are almost always combined into a RAID 1 mirror, which leaves 512 GB for data, not 1 TB. Hosts state capacity in different ways: Hetzner AX41 is listed as 2×512 GB NVMe, while Digital Pacific says plainly for its X-C6620-2 plan "4 x 480 GB SSD, RAID 10, capacity after RAID 960 GB". If the line shows only a final figure, ask how many disks it includes and what RAID level is used.
The disk type affects speed more than the line suggests. In the catalog, SSDs are used in 3,888 plans, NVMe in 2,134 and HDDs in 1,688. An HDD is cheaper per terabyte and suits archives and backups, but not a database. The difference between NVMe and SATA SSD is explained in the article NVMe or SSD, and RAID levels and which one to choose in the article RAID on a dedicated server.
Port and traffic
The port is the maximum speed of the link. 1 Gbit/s is up to 125 megabytes per second, and over 30 days of continuous operation at full speed that comes to about 324 terabytes. So "1 Gbit/s, 30 TB of traffic" means you can sustain full speed for roughly a tenth of the month on average. Beget is one example: a 1 Gbit/s link, 30 TB included, ₽200 per terabyte beyond that.
The port speed is known for 6,191 plans in the catalog: 100 Mbit/s or less for 447, 1 Gbit/s for 3,622, more than 1 Gbit/s for 1,685, and of those 10 Gbit/s or more for 1,119. Unlimited traffic is recorded for 3,259 plans, a quota for 2,515, and for another 1,936 the host does not state the amount. Ask whether the port speed is guaranteed or the link is shared across the rack: Hetzner, for example, states plainly "1 Gbit/s guaranteed". More in the article server bandwidth and traffic; for a selection with unlimited traffic see dedicated servers with unlimited traffic.
What else goes into the price
- Setup fee. A one-time fee applies to 982 plans in the catalog. At OVHcloud it equals one month's rent with monthly billing and is waived when you pay for 12 or 24 months. Hetzner AX42 charges a one-time €49; AX41 and EX44 have no fee.
- Tax. European hosts often show prices excluding VAT. If you pay as an individual or a company from a country where VAT is charged, the total will be higher.
- IPv4. One address is usually included, and extra ones cost money. Beget, for example, gives 4 IPv4 addresses free.
- Billing term. A "from" price is often quoted for annual payment. Compare monthly prices for the same term.
What to ask your host
- What is the exact CPU model and the number of physical cores?
- Is the memory ECC, and how many memory slots are free?
- What is the disk capacity after RAID, and is the RAID software or hardware?
- Is the port speed guaranteed or shared, how much traffic is included and how much does overage cost?
- How much is the setup fee and how quickly is the server delivered?
- How quickly is a failed disk replaced, and is there a remote console (IPMI, KVM)?
All plans with filters by CPU, memory, disks and port are in the dedicated servers section; budget options are in the selection cheap dedicated servers.