A dedicated server with NVMe: how to tell an enterprise drive from a consumer one
This selection contains only physical servers where every drive is NVMe. As of 3 November 2026 that is 1,037 plans from 61 hosts. The lowest price is about $32 a month, the median about $340. The most common capacities are 1.92 TB, 1 TB, 2 TB and 3.84 TB, usually two drives per server. The processors vary widely: Ryzen 5 3600 and 5600X, Ryzen 9 5900X, 5950X, 7950X and 9950X, EPYC 4344P and 7502, Xeon Gold 6152 and Silver 4116. 64 and 128 GB of memory are the most frequent. Most plans are in Germany, the US, Russia, the UK, Canada and France.
Why NVMe is faster than SATA SSD
A SATA SSD connects through an interface designed for hard drives: under the AHCI specification it has a single command queue 32 deep. NVMe connects directly to the PCIe bus and, under the NVM Express specification, supports up to 64 thousand queues of 64 thousand commands each. Every CPU core can send commands to its own queue without waiting for the others.
In sequential reads the difference shows up as throughput: SATA tops out at about 550 MB/s, NVMe on PCIe 3.0 x4 gives up to 3.5 GB/s, on PCIe 4.0 up to 7 GB/s. But for a server, small random reads and writes matter more: that is how databases, mail servers and builds of projects with thousands of files work. Here NVMe is several times faster than SATA SSD, with latency in tens of microseconds instead of hundreds.
Where NVMe pays off and where it does not
- Databases. Every transaction writes the log to disk and waits for confirmation. The lower the write latency, the more transactions per second.
- Virtualization. A dozen machines on one drive create many parallel requests, which is exactly what NVMe queues are for. Ready-made configurations are in the servers for virtualization selection.
- Code builds and CI. Compilation reads and writes thousands of small files.
- Game servers. Saving the world does not cause lag for players.
For archives, backups and video NVMe is overkill: what matters there is the price per terabyte, and hard drives are several times cheaper. Such plans are in the storage servers selection.
Enterprise or consumer drive
Capacity often hints at the drive class. 1.92 TB, 3.84 TB and 7.68 TB are typical enterprise NVMe sizes: part of the flash is kept in reserve, which improves endurance and write consistency. 1 TB, 2 TB and 4 TB more often mean desktop models. This is not a rule, but it is a good reason to ask for the drive model.
What sets enterprise drives apart:
- Write endurance. Measured in DWPD: how many times a day the full capacity of the drive can be rewritten over the warranty period. Enterprise models are usually rated at 1–3 DWPD, consumer ones several times less.
- Power-loss protection. Capacitors on the drive board let it flush data from the cache when power is cut. Without it a database risks a corrupted page.
- Consistent speed. Consumer drives are fast until the write cache runs out. Under sustained load their speed can drop several times over, while enterprise drives hold it steadier.
Capacity and number of drives
The most common setup in the selection is two identical drives. You can mirror them for protection against a failure, or use them separately: the system and database on one, backups on the other. The second option gives twice the space, but if a drive fails, part of the data has to be restored from backup.
If you need more than 4 TB of fast storage, look at EPYC and Xeon Scalable servers: they have dozens of PCIe lanes and bays for 4–10 NVMe drives. Desktop platforms have few lanes, and usually no more than two or three NVMe drives are fitted. Compare platforms in the EPYC servers and Ryzen selections.
RAID on NVMe
Ordinary hardware RAID controllers are designed for SATA and SAS, so NVMe drives in rented servers are almost always combined in software: with mdadm on Linux or in ZFS. A two-drive mirror (RAID 1) is the minimum protection: if one drive fails, the server keeps running while the host replaces it. RAID 10 on four drives is faster and also survives the loss of a drive. Ask whether the host builds the RAID when installing the system or whether you have to do it yourself. How to choose a RAID level and check the array once the server is handed over is covered in RAID on a Dedicated Server.
How to check the drives once the server is handed over
nvme listshows drive models and capacities; compare them with the plan.nvme smart-log /dev/nvme0shows wear (percentage_used), the error count and how much data has already been written. If a drive arrives with wear in the tens of percent, ask for a replacement.- A short
fiotest with 4 KB random writes shows the real speed under load rather than the figure from the spec sheet.
If a dedicated server is more than you need for now, compare VPS on NVMe: the drive there is fast too, but shared with other customers.