A server with 512 GB of RAM: when you need that much and why the platform generation matters
512 GB is not memory you take just in case but for a specific job: the data or the model cannot be split across machines and has to sit entirely in the memory of one server. As of 7 November 2026 the selection holds 109 plans from 28 hosts with 512 GB of memory or more. Three quarters of them have exactly 512 GB, about 15 % have 768 GB, and the rest 1 TB or more. The median is about $1,163 a month, a quarter of the plans cost less than $699, and a quarter more than $1,819. Most offers are in Russia and the US, followed by Finland and the Netherlands.
What 512 GB is used for
- Databases that cannot be split. PostgreSQL or MySQL with a 300–400 GB working set, when sharding would mean rewriting the application. Here memory is cheaper than a rewrite: queries read data from the cache, and the disk is left to write the log.
- Analytics and in-memory stores. ClickHouse with large joins and aggregations, Redis or Tarantool with datasets of hundreds of gigabytes, Apache Spark on a single node. These systems need memory both for the data and for intermediate query results.
- Language models on the CPU. A 671-billion-parameter model quantized to 4 bits takes about 400 GB, so it fits entirely on a 512 GB server with no GPUs. Generation speed is limited by memory bandwidth, which is why the platform matters so much here (more on that below). If you need speed rather than capacity, see dedicated servers with GPUs.
- Dense virtualization. 50–60 machines with 8 GB each on a single Proxmox or VMware ESXi node. Beyond that, cores and disks become the limit; what such servers need is covered in the selection of servers for virtualization.
- Scientific computing. Genome assembly, large graph processing, simulations: tasks where the whole dataset has to be available at once.
The same 512 GB, different speeds
The amount of memory on a plan card says nothing about how fast it is. Bandwidth depends on the number of channels and the module frequency, and between generations it differs several times over:
- Xeon E5 v2–v4: four DDR3 or DDR4 channels per processor; for v4 with DDR4-2400 that is about 77 GB/s per socket. About 15 % of the selection and the cheapest way in, with a median of about $653. These are usually dual-processor servers from 2013–2016.
- EPYC 7002 and 7003: eight DDR4-3200 channels, about 205 GB/s per socket. A quarter of the plans, with a median of about $841: they most often give the best balance of price and speed.
- EPYC 9004: twelve DDR5-4800 channels, about 460 GB/s per socket. About 15 % of the plans, with a median of about $1,835. For language models and analytics that is six times as much as a single Xeon E5 v4.
- Xeon Scalable: from six DDR4 channels in the first two generations to eight DDR5 channels in the fourth. They make up almost 40 % of the selection, with prices ranging from EPYC 7002 level to EPYC 9004 level depending on the generation.
If the job is to hold a lot of data in memory and rarely scan through it (caching, virtual machines with moderate load), an older platform pays off. If the program reads through all of memory, as in analytics, models and table scans, a newer platform is worth the extra cost. Processor models are easy to compare in the selections of EPYC servers and Xeon Gold and Platinum servers.
What to check before ordering
- How the memory is populated. 512 GB can be made of 16 modules of 32 GB or 8 modules of 64 GB. What matters is that every processor channel is populated: eight modules in a dual-socket EPYC leave half the channels empty and halve the bandwidth. On many platforms, two modules per channel lower the memory frequency. Ask the host about the layout or check it yourself with
dmidecode -t memory. - Whether memory can be added. If the slots are filled with 32 GB modules, expanding to 768 GB or 1 TB means replacing all the modules rather than adding more.
- Disks to match the memory. After a reboot, a 400 GB database has to be read back from disk into the cache. With NVMe that takes minutes, with hard disks noticeably longer. NVMe is fitted in about 56 % of the plans in the selection, SATA SSD in 40 %; see also servers with NVMe.
- Reboot time. At startup the server tests and initializes its memory, and with hundreds of gigabytes this takes longer than on an ordinary machine. Allow for it in the maintenance window and when updating the kernel.
- Port and traffic. A backup of hundreds of gigabytes takes hours over a 1 Gbit/s port. If data often has to be copied to other servers, ask whether a 10 Gbit/s port is available.
How to read the prices
A gigabyte of memory on these servers costs about the same as on servers with 256 GB: in the middle of the selection, plans with exactly 512 GB cost about $1,090 and plans with exactly 256 GB about $565, which is about $2.1–2.2 per GB a month. So the choice between one large server and two medium ones comes down to the task, not the price: if the data can be split, two servers with 256 GB are more reliable, since one failing does not stop everything. If it cannot, you need one server, and then it is worth paying extra for the platform generation rather than for extra cores.